Caterpillar Machine Repair Guide

This post show you guide on how to change transmission oil for Caterpillar 950F excavator.   Procedures: 1. Operate the engine for a few minutes in order to warm the transmission oil. 2. Park the machine on a hard, level surface. Lower the bucket to the ground with a slight downward pressure. Engage the parking brake and stop the engine.

This post show you guide on how to clean hydraulic tank breaker relief valve for Caterpillar 950F excavator. https://www.car-auto-repair.com The hydraulic tank breaker relief valve is located on the top of the hydraulic tank on the right side of the machine. CAT ET 2022A Diagnostic Software 1. Press the button on the top of the hydraulic breaker in order to relieve the pressure in the hydraulic tank. Remove the hydraulic tank breaker relief valve. 2. Clean the hydraulic tank breaker relief valve in a clean, nonflammable solvent. Shake the breaker relief valve dry or use pressure air to dry the breaker relief valve. 3. Install the hydraulic tank breaker relief valve. 1

This post show you guide on how to change hydraulic system oil for Caterpillar 950F excavator. Cat adapter 3 NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.  

This instruction show you guide on how to replace secondary filter number two for Caterpillar 950F excavator. Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Cat adapter 3 diagnostic tool Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates.

 This instruction show you guide on how to replace secondary filter number one for Caterpillar 950F excavator. Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

This instruction show you guide on how to replace fuel system secondary filter for Caterpillar 950F excavators. Related Contents: Newest CAT adapter 3 478-0235 CAT ET 2022A Procedures: Caterpillar 950F Excavator Fuel System Secondary Filter Replace Guide