Caterpillar Machine Repair Guide

This instruction show you guide on how to replace and clean Engine Air Filter Primary Element for Caterpillar 950F excavator.More about Caterpillar repair manuals please refer to: CAT SIS 2021  Procedures: 1. The air filter is located on the right side of the machine. 2. Remove cover (1) from the air filter housing. 3. Remove primary element (2) from the air filter housing. 4. Clean the inside of the air filter housing. 5. Inspect the primary element. If the pleats, the gaskets, or the seals are damaged, discard the element and replace the element with a clean primary element.   NOTICE Do not clean the primary elements by bumping or tapping them. Do not use primary elements with damaged pleats, gaskets or seals. Engine damage can result. Make sure the cleaned primary elements are completely dry before installing them into the filter housing. Water remaining in the elements can cause false indications of contamination in S·O·S Analysis test results. 6. If the primary element is not dama

This instruction show  you guide on how to  change cooling system coolant (DEAC) for Caterpillar 950F.More about Caterpillar repair manuals please refer to: CAT SIS 2021   Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing,adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Note: This procedure pertains to Caterpillar Diesel Engine Antifreeze/Coolant (DEAC) only. This procedure does not pertain to machines that are s

This is a Caterpillar battery maintenance instruction for Caterpillar 950 excavator.More about Caterpillar repair manuals please refer to: CAT SIS 2021 Caterpillar Battery - Clean One battery is located on each side of the machine under the access door. Clean the battery terminals and the surfaces of the batteries with a clean cloth. Coat the battery terminals with petroleum jelly. Make sure that the battery cables are installed securely. Caterpillar Battery - Recycle SMCS Code: 1401-561 1. Always recycle a battery. Never discard a battery. 2. Always return used batteries to one of the following locations. • A battery supplier • An authorized battery collection facility • Recycling facility Caterpillar Battery Electrolyte Level -Check SMCS Code: 1401-535-FLV Check the electrolyte level according to the following table. Caterpillar excavator Repair Tighten the battery retainers on all machines at every 1000 hour interval. Each battery cell should not require more than 30 cc (1 oz) of wa