Clean and Replace Engine Air Filter Primary Element for Caterpillar Excavator

This instruction show you guide on how to replace and clean Engine Air Filter Primary
Element for Caterpillar 950F excavator.More about Caterpillar repair manuals please refer to:CAT SIS 2021

 Procedures:

1. The air filter is located on the right side of the machine.

2. Remove cover (1) from the air filter housing.
3. Remove primary element (2) from the air filter housing.

4. Clean the inside of the air filter housing.
5. Inspect the primary element. If the pleats, the gaskets, or the seals are damaged, discard the element and replace the element with a clean primary element.
 

NOTICE
Do not clean the primary elements by bumping or tapping them. Do not use primary elements with damaged pleats, gaskets or seals. Engine damage can result.
Make sure the cleaned primary elements are completely dry before installing them into the filter housing.
Water remaining in the elements can cause false indications of contamination in S·O·S Analysis test results.
6. If the primary element is not damaged, clean the primary element.
The primary element can be cleaned by using the following methods:
• Pressure air
• Pressure water
• Detergent washing
Note: If the element has been used for one year or the element has been cleaned for the sixth time,replace the primary element.Caterpillar excavator Repair

7. When you clean the inside pleats and the outside pleats, direct the air or the water along the pleats.
If you use pressure air, the maximum air pressure is 205 kPa (30 psi). If you use pressure water,the maximum water pressure is 280 kPa (40 psi).

The primary element can be washed in warm water with a nonsudsing household detergent.Fully rinse the pleats. Allow the primary element to air dry completely.

8. Inspect the primary element after you clean the element. Do not use an element if the pleats, the gaskets or the seals are damaged.
9. Cover the clean primary element. Store the element in a clean, dry location.
10. Install a clean primary element.
11. Clean the cover and install the cover on the air filter housing. Fasten the clips in order to secure the cover.
12. Close the engine access door. CAT SIS 2021 Free Download

Comments

  1. SukhAmritWaterPurifierMarch 30, 2022 at 4:02 AM

    Nice Article! We provide filter service near you
    . We offer the best filter services for your house and offices. Get Your RO water filter Service by Certified Experienced Technicians. We provide reliable and 100% trustful services to our clients.

    ReplyDelete

Post a Comment

Popular posts from this blog

Caterpillar Compression Brake Solenoid Test Guide

Caterpillar Compression Brake Solenoid Test function allows brake wiring or solenoid problems to be identified when the engine is not running. This test does not verify proper brake valve actuation.   Related Contents: Caterpillar ET 2023C 2019C 2018A Electronic Technician Software Free Download CAT Adapter 3 ET4 478-0235 High Quality Diagnostic Adapter Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download Caterpillar 18 digits factory password calculator Accessing To run the Compression Brake Solenoid Test function: Select “Diagnostic Tests” from the Diagnostics menu, and then select “Compression Brake Solenoid Test” from the submenu. The Compression Brake Solenoid Test screen is displayed. Screen Layout The Compression Brake Solenoid Test screen has the following areas: Tree Area The Injector Solenoid Test Tree area lists the available ECMs and the selected diagnostic test. Note: If more than one diagnostic test is available, the selected test will be highlighted. ...
Read more

How to Build Connection between PC and CAT ET4 Adapter

Image
Here is a guide on how to build connection between laptop and CAT ET4 diagnostic adapter . To connect the Communication Adapter 3 (“Comm Adapter 3”) to the PC, perform the following steps: Step 1: Align and attach the DB25 connector end of the USB PC cable to the “PC cable” end connection on the Comm Adapter 3. Step 2: Plug the USB Connector end of the PC cable into the USB port of the PC To connect the Comm Adapter 3 to the data link, perform the following steps: Step 1 After connecting the Comm Adapter 3 to the PC, connect the DB15-style connector end of the data link cable to the “Data Link” connection on the Comm Adapter 3. Step 2 Connect the other end of the data link cable to the service connector on the product. The lights on the front of the Comm Adapter 3 will glow and then will sequentially turn off from the top (“Data Link” end) to the bottom (“Computer” end) of the device. The Power LED will turn color from orange to red, and then the blue "USB" LED will blink onc...
Read more

How to Change Cooling System Coolant (DEAC) for Caterpillar 950F

This instruction show  you guide on how to  change cooling system coolant (DEAC) for Caterpillar 950F.More about Caterpillar repair manuals please refer to: CAT SIS 2021   Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing,adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Note: This procedure pertains to Caterpillar Diesel Engine Antifreeze/Coolant (DEAC) only. This procedure does not pertain to machi...
Read more