Caterpillar Injection Actuation Pressure Test

Cat ET 2024A Injection Actuation Pressure Test function checks for leaks on all hydraulic components. This test allows the user to change the desired pressure and then view the actual pressure results. 



Related Contents:
Caterpillar ET 2023C 2019C 2018A Electronic Technician Software Free Download
CAT Adapter 3 ET4 478-0235 High Quality Diagnostic Adapter
Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download 

Caterpillar 18 digits factory password calculator


Accessing
To run the Injection Actuation Pressure Test function, select “Diagnostic Tests” from the Diagnostics menu, and then select “Injection Actuation Pressure Test” from the submenu. The Injection Actuation Pressure Test screen is displayed.
 

Screen Layout
The Injection Actuation Pressure Test screen has the following areas:
 

Display Area
The Injection Actuation Pressure Test setup condition area has three columns: Description – Provides the name of the parameter set to run the test
Required Condition – Displays the value that the parameter must meet in order to run the test  Actual Value – Displays the actual value of the parameter listed in the Required Condition column
 

Status Parameter Area
The Injection Actuation Pressure Test status parameter area lists parameters and their current values and units of measure. The parameters listed in this area are dependent on the product being tested. https://www.car-auto-repair.com
 

Status Line
Test status line indicates whether the test is "On" or "Off."
 

Buttons
The Buttons available in the Injection Actuation Pressure Test screen are: Start – Click this button to begin the Injection Actuation Pressure test
Stop – Click this button to stop testing
Step Up – Click this button to increase the desired pressure of the system. Note: This button is disabled once the pressure value is at its maximum. It may or may not be available based on the current ECM.
Step Down – Click this button to decrease the desired pressure of the system. Note: This button is disabled once the pressure value is at its minimum. It may or may not be available based on the current ECM.

Comments

Popular posts from this blog

Caterpillar Compression Brake Solenoid Test Guide

How to Build Connection between PC and CAT ET4 Adapter

How to Change Cooling System Coolant (DEAC) for Caterpillar 950F