Caterpillar 72H Pipelayer Braking System Test Guide

Here is an instruction show you guide on how to test braking system for Caterpillar 72H pipelayer.

Preparations:

Caterpillar CAT ET 2022A Diagnostic Software

CAT 3 Adapter



Procedures:
If the machine moves during the test, reduce the engine speed immediately, and engage the parking brake.
If the machine moved while testing the brakes,consult your Caterpillar dealer for brake
inspection and repair. Damaged brakes must be repaired before returning the machine to operation.



Note: Driving through the brakes in the first speed range is possible for this machine.
Make sure that the area around the machine is clear of personnel and clear of obstacles.
Test the brakes on a dry, level surface.
Fasten the seat belt before you test the brakes.

1. Start the engine.
2. Raise all attachments.
3. Depress the service brake pedal.
4. Release the parking brake.
5. While the brake pedal is depressed, move the directional control to the SECOND SPEED FORWARD position.
6. Gradually increase the engine speed to full load speed. The machine should not move.
7. Move the directional control to the NEUTRAL position.
8. Reduce the engine speed to LOW IDLE. Engage the parking brake. Lower all attachments to the ground. Apply a slight down pressure. Stop the engine.
9. Make any necessary repairs before you operate the machine.
CAT ET 2022A 2019C 2018A Free Download


NOTICE
If the machine moved while testing the brakes,contact your Caterpillar dealer. Have the dealer inspect and, if necessary, repair the service brake before returning the machine to operation.

Comments

Popular posts from this blog

Caterpillar Compression Brake Solenoid Test Guide

How to Build Connection between PC and CAT ET4 Adapter

How to Change Cooling System Coolant (DEAC) for Caterpillar 950F